Модели мебели, излучающие свечение, издревле привлекают нас своим необычным видом. Собранный своими руками светящийся питание может становиться украшением в жилой комнате, на кухне иначе на дачном участке. В данной инструкции мы объясним, вдруг сделать светящийся питание из дерева с флуоресцентными вкраплениями в столешнице.
Дабы «заграждать» столик гореть, нам нужно доставать соответствующим инструментом и материалами.
Сбруя
Приобретаем тож берем в аренду грядущий электроинструмент.
Электродрель, с через которой делаем отверстия перед шплинты. Используя абразивные круги, в теле древесины дрелью создаем декоративные углубления.
Шлифмашинка, которой доводим поверхность столешницы накануне идеально ровного состояния.
Молоток.
Коллекция струбцин, что понадобится чтобы стяжки досок.
Рубанок, вынужденный чтобы предварительной обработки древесины.
Электролобзик, нужный для подрезания торцов столешницы.
Газовая горелка, которой будем мотать полости в дереве.
Сопутствующий инструмент (отвертки, стамески, пила, рулетка, строительный нож и прочее).
Материалы
Воеже изготовить
стол с подсветкой из дерева своими руками, подбираем нужные ради этого материалы:
4 кипарисовые тож сосновые доски размером 1500 х 150 х 40 мм. Эта древесина понадобится нам чтобы изготовления столешницы, которая будет излучать свечение;
металлические ножки;
эпоксидная смола в двух пластиковых флаконах объемом по 118 мл;
пластиковые стаканчики – 6 шт.;
флуоресцентный порошок ради создания светового фона – 100 г;
скотч;
фанера alias лист пластика – 600 х 1500 мм.
Пошаговая приказ сборки светящегося стола
Доски соединяем шплинтами и склеиваем между собой. Щит стягиваем струбцинами предварительно полного застывания клея.
Боковые кромки столешницы обрабатываем рубанком и шлифуем.
Торцы стола обрезаем электролобзиком перед одинокий уровень. Кроме шлифуем их.
Кипарисовое дерево имеет в своей структуре смоляные камеры. Их очищаем полукруглой стамеской, не нарушая природной формы.
Полости продуваем пылесосом и сушим феном.
Готовим эпоксидный наполнитель. Смешиваем смолу с отвердителем в одноразовых пластиковых стаканчиках. Туда же добавляем люминофор (для 100 г смолы расходуем 10 г порошка).
Во избежание протечки смолы стол обклеиваем скотчем по периметру, снизу подкладываем куски фанеры либо пластика.
Однако полости и трещины в столешнице заливаем флуоресцентной смесью. Оставляем древесный вещь в покое на сутки. Изза это время раствор окончательно застынет.
Всю вид обрабатываем шлифмашинкой предварительно получения идеально гладкой плоскости.
Столешницу покрываем 3 слоями мебельного лака.
Формируем опорную раму из доски шириной 50 мм и более.
Столешницу крепим к раме и устанавливаем ножки. В результате получаем оригинальный светящийся стол, сделанный из дерева своими руками.
Особенности сборки столешницы из сосновой доски
Когда возникают затруднения с приобретением кипарисовой доски, заменяем ее пиломатериалом из сосны. Ради того дабы создать выемки на поверхности сосновой столешницы, применяем газовую горелку.
На досках горелкой выжигаем прогалины нужной формы. Конфигурация полостей зависит через фантазии мастера. Мы создаем вырубку на поверхности древесины в виде звездочек и различных геометрических фигур. Обожженная древесная поверхность эффектно подчеркивает рельеф структуры дерева, сколько придает столешнице дополнительную привлекательность.